Home › Aluminum and Steel Fence Installation
We install aluminum and steel fences in Bartlett, TN that combine strength with a classic ornamental look. These low maintenance metal fences are perfect for pools, front yards, and property lines, providing security without blocking views and enhancing your home's curb appeal.
Legendary Fence Company Bartlett provides professional aluminum fence throughout Bartlett, TN, Tennessee and the surrounding area. Our licensed, insured crew delivers safe, clean, on-time work with a free estimate before anything begins. Call 901-617-4071 or request your free quote.
Aluminum and Steel Fencing for Bartlett Homes and Businesses
If you are looking for a sharp, low‑maintenance fence that stands up to Bartlett weather, aluminum and steel are hard to beat. At Legendary Fence Company Bartlett, we focus on designing and installing metal fences that fit the way people here actually use their properties, from family backyards off Stage Road to commercial lots near Highway 64.
Aluminum fence is a favorite for residential yards, pools, and decorative front boundaries because it will not rust, it is relatively light, and it offers a classic wrought‑iron look without the upkeep. Steel fence is heavier and stronger, which makes it a good choice for security perimeters, commercial properties, and spots where you expect more impact or wear.
In Bartlett, we pay close attention to how our clay soil, summer heat, and occasional freeze‑thaw cycles affect fence posts and coatings. For example, we set metal posts deep enough to get below the common frost line in Shelby County and use concrete mixes that cure well in local humidity and temperature swings. That local detail work is what keeps an aluminum or steel fence straight and solid instead of leaning after a couple of seasons.
From the first visit, we walk your property with you, talk about how you actually use the space (kids, pets, parking, visibility, HOA rules), and then recommend an aluminum or steel solution that fits those priorities instead of forcing a one‑size‑fits‑all design.
Design Options, Styles, and Finishes
Aluminum and steel fences are more flexible than many people expect. Legendary Fence Company Bartlett can match a wide range of looks, from traditional spear‑top metal fencing to modern, clean horizontal lines.
For aluminum fences, common styles in Bartlett include flat‑top panels for backyards and pool enclosures, pressed‑spear tops for a traditional look at front yards, and three‑rail designs that balance security with visibility. For families with small dogs, we often recommend panels with reduced picket spacing near the bottom so pets cannot slip through. Around pools, we only use code‑compliant aluminum fence systems that meet pool safety requirements for height, latch placement, and climb resistance.
Steel fence designs include heavier ornamental panels that mimic old wrought iron, as well as basic vertical bar systems for commercial sites. Where security is a concern, we can add features like extended pickets, closer spacing, and lockable gates with reinforced frames and commercial grade hinges.
Finish options usually include high‑quality powder coating in black, bronze, or white. Black is the most popular in Bartlett because it tends to visually disappear against lawns and trees, which helps your yard feel open while still being fully enclosed. For properties near busy roads, we sometimes recommend darker, textured finishes that hide dust from traffic and pollen from our local tree species.
We also look at slopes and uneven ground carefully. Many Bartlett lots are not perfectly flat, so we decide whether to “rack” panels to follow your grade smoothly or to step them for a more formal look. During the design phase, we show you what each approach would look like, so you can decide how you want the fence to sit against your landscape.
How Our Aluminum and Steel Fence Installation Process Works
A quality aluminum or steel fence starts long before the first post goes in the ground. Legendary Fence Company Bartlett follows a step‑by‑step installation process to keep projects on schedule and avoid problems later.
First, we complete a site evaluation. We locate existing property markers when available and, if needed, coordinate with a surveyor so your fence goes exactly where it should. We walk the fence line and note tree roots, sprinkler lines, drainage paths, and utility markings from 811. This is important in Bartlett where many older neighborhoods have shallow irrigation lines and mixed utility depths.
Second, we finalize your layout and materials. For aluminum fence, we determine panel heights, picket spacing, gate widths, and pool code needs. For steel fence, we confirm post sizes, wall thickness, and any security add‑ons. You receive a written proposal that explains materials, labor, and any extra work, such as removing old fence or clearing brush.
Third, we prepare the site. That can include removing an existing fence, trimming low limbs that interfere with the fence line, and lightly grading small humps that would otherwise create gaps. We dispose of old materials properly, which matters when we are taking out rusted steel or mixed‑material fences.
Fourth, we set posts. For most Bartlett jobs, we dig post holes to a depth of at least 24 to 30 inches, sometimes deeper for taller steel fences or gates. We use concrete around each post, adjusting the mix and cure time to match the weather. In very wet areas or spots that stay soft after rain, we may add extra depth or a wider footing to prevent future leaning.
Fifth, we install panels and gates. Aluminum panels are fastened to posts with manufacturer‑specific brackets, which we align carefully so everything runs in a straight, smooth line. Steel panels may be bracketed or welded depending on the system. Gates receive special attention: we install heavier posts, use adjustable hinges, and set latches to the correct height for code and convenience.
Finally, we complete a walkthrough with you. We check clearances at the bottom for pets, confirm gates swing and latch correctly, and make sure the fence line matches the layout we agreed on. You also receive basic maintenance guidance that fits the specific product installed on your property.
What Affects Aluminum Fence and Steel Fence Pricing
Two neighbors in Bartlett can ask for an aluminum fence and end up with very different prices. Legendary Fence Company Bartlett is open about what drives cost so you can fine‑tune your project to fit your budget.
Material type is the first factor. Aluminum fence is generally more budget‑friendly for residential jobs. Steel usually costs more per foot, both for the heavier posts and panels and for the added labor required to handle and install it. Within each material, premium ornamental styles, thicker wall posts, and special colors add cost.
Fence height and total footage play a big role. A 6‑foot aluminum fence around a large backyard off Germantown Road will cost more than a 4‑foot decorative front fence with a short run, simply because of the extra materials and labor. Corners, transitions, and multiple gates also add time and hardware.
Site conditions can raise or lower the overall price. A straight, clear line on level ground is the most efficient. If your Bartlett property has heavy brush, tree roots to work around, or steep slopes, we factor in the extra digging, grading, and custom panel adjustments. Rocky areas, which we run into occasionally along older properties, can slow post hole digging and require different anchoring methods.
Access matters as well. If we can park close and move materials in easily, labor time is lower. Tight backyards with no side access, or townhome courtyards that require carrying panels long distances, add to labor.
Finally, gates and hardware are important cost components. A simple walk gate in aluminum is relatively affordable. Double drive gates for vehicles, especially in steel, need heavier posts, more concrete, and stronger hinges and latches. If you add an automatic opener or keypad lock, we include electrical work or coordination with your electrician in the overall plan.
We always provide a detailed, line‑item estimate tailored to your aluminum or steel fence so you can see exactly where your money is going and adjust scope if needed.
Local Considerations and Keeping Your Fence Looking Great
Metal fencing is low maintenance, but not maintenance free. Legendary Fence Company Bartlett designs aluminum and steel fence projects with our local environment in mind, then shows you how to keep yours looking good for years.
Our humid summers, pollen, and occasional storms can leave any outdoor surface dirty. For powder‑coated aluminum and steel fences, rinsing with a garden hose once or twice a year and washing with mild soap as needed is usually enough. Avoid harsh chemicals and pressure washers set too high, since those can damage the finish. We point out any nearby irrigation heads that spray directly onto the fence and, if needed, help you redirect them so hard water does not leave mineral spots over time.
We also think ahead about storm impacts. In areas of your yard where limbs are likely to fall, we may recommend stronger steel sections or slightly adjusting the layout to avoid high‑risk trees. For commercial properties and exposed corners near roadways, we often reinforce gate posts and corners so they can better handle accidental contact.
Before installation, we help you confirm Bartlett or Shelby County permitting requirements, HOA guidelines, and pool safety rules. Many HOAs in and around Bartlett have specific rules for metal fence color, height, and placement. We can provide drawings, spec sheets, and photos to help with approvals so you are not stuck in review for weeks.
If something ever does go wrong, such as a vehicle hitting a panel or a gate sagging over time, metal fences are often repairable without replacing the entire line. We can replace individual aluminum or steel panels, reset posts, or upgrade hardware to handle new usage patterns.
When you are ready to talk through options, Legendary Fence Company Bartlett can visit your property, discuss whether aluminum or steel is the best fit for the way you use your space, and give you a clear, local‑specific plan for installation, cost, and long‑term care.
